{"title":"Millway BMW E46 M3 Suspension \u0026 Camber Plates","description":"\u003ch2\u003eMillway BMW E46 M3 Suspension \u0026amp; Camber Plates\u003c\/h2\u003e\u003cp\u003eBMW E46 M3 owners can build a sharper, more predictable chassis using Millway Motorsport's application-specific suspension and geometry components. This collection concentrates on manufacturer-referenced E46 M3 products rather than general E46 3 Series parts.\u003c\/p\u003e\u003ch3\u003eE46 M3 camber and caster plates\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/products\/millway-bmw-e46-m3-adjustable-camber-caster-plates-90352\"\u003eMillway 90352 adjustable camber and caster plates\u003c\/a\u003e; \u003ca href=\"\/products\/millway-motorsport-adjustable-camber-plates-with-60mm-spring-plates-e46-m3\"\u003e60mm race-spring variant\u003c\/a\u003e. Top-mount fitment depends on the suspension, strut-shaft dimensions and spring-seat arrangement. Race-spring hardware should not be assumed interchangeable with the standard spring platform.\u003c\/p\u003e\u003ch3\u003eRear subframe, differential and Uniball upgrades\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/products\/millway-bmw-e46-m3-z4-rear-subframe-solid-bushings-90406\"\u003eMillway 90406 rear subframe bushes\u003c\/a\u003e; \u003ca href=\"\/products\/millway-bmw-e46-m3-z4-m-solid-aluminium-differential-bushes-90356\"\u003e90356 differential mount bushes\u003c\/a\u003e; \u003ca href=\"\/products\/millway-bmw-e36-e46-z4-rear-trailing-arm-uniball-bushes-90088\"\u003e90088 rear trailing-arm Uniball bushes\u003c\/a\u003e. Reduced bush compliance can improve consistency under load, but solid and spherical mountings may transmit more noise and vibration than the factory rubber components.\u003c\/p\u003e\u003ch3\u003eControl arms, steering and track hardware\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/products\/millway-motorsport-dtm-front-control-arms-e46-m3\"\u003eMillway E46 M3 DTM front control arms\u003c\/a\u003e; \u003ca href=\"\/products\/millway-bmw-e46-m3-billet-offset-front-control-arm-bush-mounts-90520\"\u003e90520 front control-arm bush brackets\u003c\/a\u003e; \u003ca href=\"\/products\/millway-bmw-e46-m3-steering-rack-travel-limiters-90154-2\"\u003e90154-2 steering rack travel limiters\u003c\/a\u003e. Steering stops, bespoke control-arm settings and motorsport rod ends need specialist inspection, installation and alignment.\u003c\/p\u003e\u003ch3\u003eMillway part-number and suspension-fitment guidance\u003c\/h3\u003e\u003cp\u003eAlways verify the exact BMW chassis, M\/non-M suspension specification, part reference, spring diameter and damper hardware before ordering. Some motorsport components are designed for race suspension, may increase noise and vibration and require specialist fitting. Follow Millway's supplied instructions and arrange a four-wheel geometry check after installation.\u003c\/p\u003e\u003cp\u003eRead our \u003ca href=\"\/blogs\/buying-guides\/best-millway-camber-plates-bmw-f87-m2-f8x-m3-m4\"\u003eMillway camber plate buying guide\u003c\/a\u003e for Street versus Uniball trade-offs, or see all \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport BMW and Porsche parts\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eChoosing the correct E46 M3 camber plates\u003c\/h3\u003e\u003cp\u003eCompare the 90352 E46 M3 version with E36 and E9X M3 applications in our \u003ca href=\"\/blogs\/buying-guides\/millway-camber-plates-bmw-e36-e46-e92-m3-fitment-guide\"\u003eMillway BMW M3 camber-plate buying guide\u003c\/a\u003e. Verify the required spring seat and damper hardware before ordering.\u003c\/p\u003e","products":[{"product_id":"millway-motorsport-dtm-front-control-arms-e46-m3","title":"Millway Motorsport BMW E46 M3 DTM Adjustable Front Control Arms","description":"\u003cp\u003e\u003cstrong\u003eMillway Motorsport DTM-style adjustable front control arms for BMW E46 M3\u003c\/strong\u003e provide a wide range of front geometry adjustment for competition-focused suspension setups.\u003c\/p\u003e\u003cp\u003eUniball joints reduce compliance and the adjustable arm design allows front track width, camber and caster to be tuned around the car's ride height, tyre package and intended circuit use.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMotorsport-focused adjustable front control arms\u003c\/li\u003e\n\u003cli\u003eAdjustable track width\u003c\/li\u003e\n\u003cli\u003eCamber and caster geometry adjustment\u003c\/li\u003e\n\u003cli\u003eUniball joints for precise wheel location\u003c\/li\u003e\n\u003cli\u003eLightweight, high-strength construction\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete vehicle set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cp\u003eBMW E46 M3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRace use recommended.\u003c\/strong\u003e Professional installation and a full front suspension geometry setup are essential.\u003c\/p\u003e\u003cp\u003eView all \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport suspension parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":55090372673885,"sku":"MW90332","price":4261.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/90332.jpg?v=1733421062"},{"product_id":"millway-motorsport-upper-control-arms-e36-e46-z4-inc-m-models","title":"Millway Motorsport BMW E36 E46 Z4 Adjustable Rear Upper Control Arms","description":"\u003cp\u003e\u003cstrong\u003eMillway Motorsport adjustable rear upper control arms for BMW E36, E46 and Z4\u003c\/strong\u003e replace the original spring-supported upper arm with a lightweight, high-strength adjustable solution for cars converted to a rear coilover arrangement.\u003c\/p\u003e\u003cp\u003eMachined from 7075-T6 aluminium and fitted with inner bearings, the arms are designed to minimise deflection under load while providing a strong and precise rear suspension location.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e7075-T6 aluminium construction\u003c\/li\u003e\n\u003cli\u003eAdjustable rear upper control-arm design\u003c\/li\u003e\n\u003cli\u003eInner bearings for reduced deflection\u003c\/li\u003e\n\u003cli\u003eLightweight, high-strength construction\u003c\/li\u003e\n\u003cli\u003eAnti-roll-bar drop links included\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Notes\u003c\/h2\u003e\u003cp\u003eDesigned for compatible BMW E36, E46 and Z4 models including M variants. These arms can only be used with a rear coilover conversion. The supplied drop links are intended for bolt-type anti-roll-bar arrangements.\u003c\/p\u003e\u003cp\u003eProfessional installation and a complete rear alignment are essential after fitting.\u003c\/p\u003e\u003cp\u003eView the full \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport suspension range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":55091149275485,"sku":"MW90381","price":902.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/90381_millway_rear_control_arm_bmw_e36_e46_z4_1_3-1080x1080.jpg?v=1733425397"},{"product_id":"millway-motorsport-adjustable-camber-plates-with-60mm-spring-plates-e46-m3","title":"Millway Motorsport BMW E46 M3 60mm Camber Caster Plates","description":"\u003cp\u003e\u003cstrong\u003eMillway Motorsport adjustable camber and caster plates for BMW E46 M3\u003c\/strong\u003e are designed for suspension setups using 60mm ID race springs and provide a wide front geometry range for track-day and motorsport applications.\u003c\/p\u003e\u003cp\u003eThe mounts use roller-bearing spring plates so the spring can rotate smoothly as the steering turns, together with high-quality Uniball bearings and machined sleeves for 16mm damper rods.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAdjustable front camber and caster\u003c\/li\u003e\n\u003cli\u003eDirect fitment for 60mm ID race springs\u003c\/li\u003e\n\u003cli\u003eRoller-bearing upper spring plates\u003c\/li\u003e\n\u003cli\u003eHigh-quality Uniball bearings\u003c\/li\u003e\n\u003cli\u003eMachined sleeves for 16mm damper rods\u003c\/li\u003e\n\u003cli\u003eUp to approximately 11mm ride-height reduction possible depending on sleeve configuration\u003c\/li\u003e\n\u003cli\u003eUp to approximately 4° negative camber on a standard-height setup, with additional range possible on lowered cars\u003c\/li\u003e\n\u003cli\u003eBlack anodised aluminium with stainless-steel hardware\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProfessional fitting and a complete wheel alignment are strongly recommended.\u003c\/p\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/millway-camber-plates\"\u003eMillway camber plates\u003c\/a\u003e or the complete \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":55120025747805,"sku":"MW90352-60","price":601.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/90352-camber-m3e46-millway.jpg?v=1733586555"},{"product_id":"millway-bmw-e36-e46-z4-adjustable-rear-camber-arms-90090","title":"Millway Motorsport BMW E36 E46 Z4 Adjustable Rear Camber Arms | 90090","description":"\u003cp\u003e\u003cstrong\u003eMillway Motorsport 90090 adjustable rear camber arms\u003c\/strong\u003e are lightweight, high-strength replacements for compatible BMW E36, E46 and E85\/E86 Z4 rear lower control arms.\u003c\/p\u003e\u003cp\u003eMachined from 7075-T6 aluminium and fitted with low-compliance inner bearings, they allow rear camber to be adjusted more accurately while reducing unwanted movement under load. They are particularly useful on lowered, fast-road, track and race cars where the standard adjustment range or rubber-bushed arm is limiting the required geometry.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAdjustable rear camber\u003c\/li\u003e\n\u003cli\u003e7075-T6 aluminium construction\u003c\/li\u003e\n\u003cli\u003eInner bearings for reduced deflection\u003c\/li\u003e\n\u003cli\u003eLightweight, motorsport-focused design\u003c\/li\u003e\n\u003cli\u003eSupplied as a left and right pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBMW Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMW E36 3 Series including E36 M3\u003c\/li\u003e\n\u003cli\u003eBMW E46 3 Series including E46 M3\u003c\/li\u003e\n\u003cli\u003eBMW E85\/E86 Z4 including Z4 M\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProfessional installation and a full rear alignment are recommended. Rear toe should be checked whenever rear camber is changed.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMillway part number:\u003c\/strong\u003e 90090.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":65697494237533,"sku":"MW90090","price":350.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/90090_1.jpg?v=1787747561"},{"product_id":"millway-bmw-rear-shock-mount-reinforcement-plates-90431","title":"Millway Motorsport BMW Rear Shock Mount Reinforcement Plates | 90431","description":"\u003cp\u003e\u003cstrong\u003eMillway Motorsport 90431 rear shock mount reinforcement plates\u003c\/strong\u003e strengthen the rear shock tower area on compatible BMW E30, E36, E46, Z3 and Z4 models.\u003c\/p\u003e\u003cp\u003eCars running stiffer dampers, coilovers or regular track use can place greater load through the rear shock mounting area. These 3mm S355 steel reinforcement plates spread that load across a larger section of the body and can be installed as either a bolt-on or weld-in reinforcement.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3mm S355 steel construction\u003c\/li\u003e\n\u003cli\u003eHelps reinforce the rear shock tower\u003c\/li\u003e\n\u003cli\u003eSuitable for bolt-on or weld-in installation\u003c\/li\u003e\n\u003cli\u003eUseful with uprated dampers and coilovers\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBMW Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMW E30 including E30 M3\u003c\/li\u003e\n\u003cli\u003eBMW E36 including Compact and E36 M3\u003c\/li\u003e\n\u003cli\u003eBMW E46 including E46 M3\u003c\/li\u003e\n\u003cli\u003eBMW Z3 including Z3 M\u003c\/li\u003e\n\u003cli\u003eBMW E85\/E86 Z4 including Z4 M\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProfessional installation is recommended, particularly if the plates are welded in.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMillway part number:\u003c\/strong\u003e 90431.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":65697573831005,"sku":"MW90431","price":16.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/millway-reinforcement-plates-rear-bmw-e36-e46-z4-2.jpg?v=1787747959"},{"product_id":"millway-bmw-e46-m3-adjustable-camber-caster-plates-90352","title":"Millway Motorsport BMW E46 M3 Adjustable Camber Caster Plates | 90352","description":"\u003cp\u003e\u003cstrong\u003eMillway Motorsport 90352 adjustable camber and caster plates\u003c\/strong\u003e are a motorsport-focused front top-mount solution for the BMW E46 M3.\u003c\/p\u003e\u003cp\u003eUnlike many dedicated coilover top mounts, the 90352 is designed to work with both standard-type suspension, including lowering springs, and compatible coilover systems. The assembly maintains the original top-mount height and suspension travel in its standard configuration while providing useful front geometry adjustment.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAdjustable front camber and caster\u003c\/li\u003e\n\u003cli\u003eHigh-quality Uniball bearings\u003c\/li\u003e\n\u003cli\u003eBlack-anodised aluminium construction\u003c\/li\u003e\n\u003cli\u003eStainless-steel hardware\u003c\/li\u003e\n\u003cli\u003eCompatible with standard-type suspension and many coilovers\u003c\/li\u003e\n\u003cli\u003eMachined sleeves for 16mm damper rods\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAdjustment\u003c\/h2\u003e\u003cp\u003eHack Engineering states that up to around -4° front camber can be possible on standard suspension, with the exact result depending on ride height, damper configuration and the rest of the chassis setup. The sleeve arrangement can also allow an alternative configuration with approximately 11mm lower top-mount position where appropriate.\u003c\/p\u003e\u003ch2\u003eBMW Fitment\u003c\/h2\u003e\u003cp\u003eBMW E46 M3.\u003c\/p\u003e\u003cp\u003eProfessional installation and a full four-wheel alignment are strongly recommended. Toe should always be checked after changing front camber.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/millway-camber-plates\"\u003eMillway camber plates\u003c\/a\u003e or the complete \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMillway part number:\u003c\/strong\u003e 90352.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":65697590640989,"sku":"MW90352","price":513.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/90352-camber-m3e46-millway_70203fc5-00ed-4698-8e2e-dc4390002978.jpg?v=1787748051"},{"product_id":"millway-bmw-e36-e46-z4-rear-control-arm-outer-uniball-bushings-90452","title":"Millway Motorsport BMW E36 E46 Z4 Rear Control Arm Outer Uniball Bushings | 90452","description":"\u003cp\u003e\u003cstrong\u003eMillway Motorsport 90452 rear control arm outer Uniball bushings\u003c\/strong\u003e replace the compliant outer rear control-arm bushings on compatible BMW E36, E46 and E85\/E86 Z4 models.\u003c\/p\u003e\u003cp\u003eThe precision Uniball arrangement removes unwanted movement at the outer arm mounting point for more accurate rear suspension control. Because the bushings are eccentric, they can also be used to fine-tune rear geometry where additional correction is required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision Uniball bearing design\u003c\/li\u003e\n\u003cli\u003eHigh-quality aluminium housings\u003c\/li\u003e\n\u003cli\u003eStainless-steel spacers\u003c\/li\u003e\n\u003cli\u003eEccentric design allows geometry correction\u003c\/li\u003e\n\u003cli\u003eCan be used in compatible upper or lower outer control-arm positions\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBMW Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMW E36 including E36 M3\u003c\/li\u003e\n\u003cli\u003eBMW E46 including E46 M3\u003c\/li\u003e\n\u003cli\u003eBMW E85\/E86 Z4 including Z4 M\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProfessional fitting and a full rear alignment are recommended after installation.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/millway-suspension-bushes\"\u003eMillway suspension bushes\u003c\/a\u003e or the complete \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMillway part number:\u003c\/strong\u003e 90452.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":65697593885021,"sku":"MW90452","price":237.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/90452_millway_eccentric_bushing-2.jpg?v=1787748074"},{"product_id":"millway-bmw-e36-e46-z4-rear-trailing-arm-uniball-bushes-90088","title":"Millway Motorsport BMW E36 E46 Z4 Rear Trailing Arm Uniball Bushes | 90088","description":"\u003cp\u003e\u003cstrong\u003eMillway Motorsport 90088 rear trailing arm Uniball bushes\u003c\/strong\u003e replace the compliant factory trailing-arm bushings on compatible BMW E36, E46 and E85\/E86 Z4 models.\u003c\/p\u003e\u003cp\u003eThe billet aluminium and precision-bearing construction removes unwanted deflection from the trailing-arm pivot, helping reduce geometry changes as the rear suspension moves through its travel.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision Uniball bearing design\u003c\/li\u003e\n\u003cli\u003eBillet aluminium construction\u003c\/li\u003e\n\u003cli\u003eSupplied with threaded locking rings and sleeves\u003c\/li\u003e\n\u003cli\u003eReduces trailing-arm deflection\u003c\/li\u003e\n\u003cli\u003eImproves rear suspension precision under load\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBMW Fitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMW E36 including E36 M3\u003c\/li\u003e\n\u003cli\u003eBMW E46 including E46 M3\u003c\/li\u003e\n\u003cli\u003eBMW E85\/E86 Z4 including Z4 M\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProfessional fitting and a full rear geometry check are recommended after installation. A solid bearing arrangement will transmit more road and suspension feedback than the original rubber bushing.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/millway-suspension-bushes\"\u003eMillway suspension bushes\u003c\/a\u003e or the complete \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMillway part number:\u003c\/strong\u003e 90088.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":65697620722013,"sku":"MW90088","price":265.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/90088-1.jpg?v=1787748245"},{"product_id":"millway-bmw-e36-e46-e8x-e9x-fixed-race-camber-plates-90435","title":"Millway BMW E36 E46 E8X E9X Fixed Race Camber Plates | 90435","description":"\u003ch2\u003eMillway BMW E36 E46 E8X E9X Fixed Race Camber Plates | 90435\u003c\/h2\u003e\u003cp\u003eGenuine \u003cstrong\u003eMillway Motorsport\u003c\/strong\u003e performance component, manufactured in Sweden for \u003cstrong\u003eBMW E36 and E46 3 Series (including selected M3), E8X 1 Series (including 1M) and E9X 3 Series\/M3\u003c\/strong\u003e. Correct manufacturer reference: \u003cstrong\u003e90435\u003c\/strong\u003e (Nineteen72 SKU MW90435).\u003c\/p\u003e\u003ch3\u003eKey features and specification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFixed-position rally\/race plate design; camber setting selected by rotating the mount\u003c\/li\u003e\n\u003cli\u003e20mm internal-diameter motorsport spherical bearing\u003c\/li\u003e\n\u003cli\u003eSupplied as a left and right pair\u003c\/li\u003e\n\u003cli\u003eRequires correctly machined damper-shaft spacers and compatible spring thrust\/needle bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle compatibility\u003c\/h3\u003e\u003cp\u003eBMW E36 and E46 3 Series (including selected M3), E8X 1 Series (including 1M) and E9X 3 Series\/M3. Confirm suspension generation, axle position and installation hardware against the exact manufacturer part number. Vehicle fitment may differ with aftermarket suspension or modified mounting points.\u003c\/p\u003e\u003ch3\u003eInstallation and ordering\u003c\/h3\u003e\u003cp\u003eRace-only top mounts. Specialist assessment of the strut, bearing support, spring and suspension package is essential. Hack Engineering lists these as made to order, usually around 2–3 weeks when not stocked.\u003c\/p\u003e\u003cp\u003ePrice shown is inclusive of UK VAT. Supplier availability may change; if a part is reserved or manufactured to order, the lead time will be confirmed before dispatch.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/millway-motorsport\"\u003eall Millway Motorsport parts\u003c\/a\u003e, \u003ca href=\"\/collections\/millway-camber-plates\"\u003eMillway camber plates\u003c\/a\u003e or \u003ca href=\"\/collections\/millway-suspension-bushes\"\u003eMillway suspension bushes\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618599993734,"sku":"MW90435","price":432.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/mw90435-millway-product.jpg?v=1791895668"},{"product_id":"millway-bmw-e30-e36-e46-z3-z4-uniball-rear-shock-top-mounts-90020","title":"Millway BMW E30 E36 E46 Z3 Z4 Uniball Rear Shock Top Mounts | 90020","description":"\u003ch2\u003eMillway BMW E30 E36 E46 Z3 Z4 Uniball Rear Shock Top Mounts | 90020\u003c\/h2\u003e\u003cp\u003eGenuine Millway Motorsport component from Sweden for \u003cstrong\u003eBMW E30, E36 and E46 3 Series (including M3) plus E36-platform Z3 and E85\/E86 Z4 including M models\u003c\/strong\u003e. Millway manufacturer reference \u003cstrong\u003e90020\u003c\/strong\u003e; Nineteen72 catalogue SKU MW90020.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSolid billet-aluminium upper rear damper mounts with spherical Uniball bearings\u003c\/li\u003e\n\u003cli\u003eSupplied as a left\/right pair\u003c\/li\u003e\n\u003cli\u003eThree-millimetre offset may provide clearance for rear coilover installations\u003c\/li\u003e\n\u003cli\u003eSupplied with sleeves for 10mm rear damper rods; different diameters require confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBMW fitment\u003c\/h3\u003e\u003cp\u003eBMW E30, E36 and E46 3 Series (including M3) plus E36-platform Z3 and E85\/E86 Z4 including M models. Exact chassis, suspension or seat configuration matters; check the manufacturer part number before purchasing.\u003c\/p\u003e\u003ch3\u003eInstallation and availability\u003c\/h3\u003e\u003cp\u003eThese are spherical-bearing rear damper top mounts, not the clevis-style kit for rod-end dampers (Millway 90366). Check rod diameter, spring arrangement and the vehicle's rear shock-tower mounting before fitting.\u003c\/p\u003e\u003cp\u003eSold at the stated price including UK VAT. Stock and dispatch lead times depend on the UK supplier. Contact Nineteen72 for confirmation on special-order parts.\u003c\/p\u003e\u003cp\u003eBrowse our \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport catalogue\u003c\/a\u003e and \u003ca href=\"\/collections\/track-day-motorsport-parts\"\u003etrack-day parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618613330310,"sku":"MW90020","price":194.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/mw90020-millway-photo.jpg?v=1791895979"},{"product_id":"millway-bmw-e36-e46-z4-rear-upper-inner-control-arm-uniball-bushes-90327","title":"Millway BMW E36 E46 Z4 Rear Upper Control Arm Uniball Bushes | 90327","description":"\u003ch2\u003eMillway BMW E36 E46 Z4 Rear Upper Control Arm Uniball Bushes | 90327\u003c\/h2\u003e\u003cp\u003eGenuine Millway Motorsport component from Sweden for \u003cstrong\u003eBMW E36 3 Series\/M3, E46 3 Series\/M3, E85\/E86 Z4 and Z4 M rear upper inner control arms\u003c\/strong\u003e. Millway manufacturer reference \u003cstrong\u003e90327\u003c\/strong\u003e; Nineteen72 catalogue SKU MW90327.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrecision Uniball rear upper-inner control arm bushes\u003c\/li\u003e\n\u003cli\u003eBillet aluminium housings with stainless-steel spacers\u003c\/li\u003e\n\u003cli\u003eSold as a pair of two bushings\u003c\/li\u003e\n\u003cli\u003eAimed at reducing the deflection of the rear upper control-arm mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBMW fitment\u003c\/h3\u003e\u003cp\u003eBMW E36 3 Series\/M3, E46 3 Series\/M3, E85\/E86 Z4 and Z4 M rear upper inner control arms. Exact chassis, suspension or seat configuration matters; check the manufacturer part number before purchasing.\u003c\/p\u003e\u003ch3\u003eInstallation and availability\u003c\/h3\u003e\u003cp\u003eThese are inner upper rear-control-arm bushes, not the eccentric outer bushings (Millway 90452). Check the exact arm and vehicle configuration; alignment is required after fitting.\u003c\/p\u003e\u003cp\u003eSold at the stated price including UK VAT. Stock and dispatch lead times depend on the UK supplier. Contact Nineteen72 for confirmation on special-order parts.\u003c\/p\u003e\u003cp\u003eBrowse our \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport catalogue\u003c\/a\u003e and \u003ca href=\"\/collections\/track-day-motorsport-parts\"\u003etrack-day parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618613461382,"sku":"MW90327","price":205.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/mw90327-millway-photo.jpg?v=1791895988"},{"product_id":"millway-bmw-e36-e46-m3-z4-race-seat-floor-mount-brackets-90361","title":"Millway BMW E36 E46 M3 Z4 Race Seat Floor Mount Brackets | 90361","description":"\u003ch2\u003eMillway BMW E36 E46 M3 Z4 Race Seat Floor Mount Brackets | 90361\u003c\/h2\u003e\u003cp\u003eGenuine Millway Motorsport component from Sweden for \u003cstrong\u003eBMW E36 3 Series\/M3, E46 3 Series\/M3 and E85\/E86 Z4\/Z4 M\u003c\/strong\u003e. Millway manufacturer reference \u003cstrong\u003e90361\u003c\/strong\u003e; Nineteen72 catalogue SKU MW90361.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePair of left\/right-compatible floor mounting rails for one fixed-back race seat\u003c\/li\u003e\n\u003cli\u003eMultiple mounting hole positions to support seat adjustment\u003c\/li\u003e\n\u003cli\u003eAnodised black aluminium construction with underside weight-relief pockets\u003c\/li\u003e\n\u003cli\u003eCan be fitted for driver or passenger seating position\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBMW fitment\u003c\/h3\u003e\u003cp\u003eBMW E36 3 Series\/M3, E46 3 Series\/M3 and E85\/E86 Z4\/Z4 M. Exact chassis, suspension or seat configuration matters; check the manufacturer part number before purchasing.\u003c\/p\u003e\u003ch3\u003eInstallation and availability\u003c\/h3\u003e\u003cp\u003eConfirm the seat side mounts, harness geometry and any seat-slider requirements before fitting. Pair is for one seat, not two. Motorsport seat and restraint modifications may require road-use or motorsport compliance checks.\u003c\/p\u003e\u003cp\u003eSold at the stated price including UK VAT. Stock and dispatch lead times depend on the UK supplier. Contact Nineteen72 for confirmation on special-order parts.\u003c\/p\u003e\u003cp\u003eBrowse our \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport catalogue\u003c\/a\u003e and \u003ca href=\"\/collections\/track-day-motorsport-parts\"\u003etrack-day parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618613494150,"sku":"MW90361","price":256.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/mw90361-millway-photo.jpg?v=1791895994"},{"product_id":"millway-bmw-e30-e36-e46-z3-z4-clevis-rear-shock-top-mounts-90366","title":"Millway BMW E30 E36 E46 Z3 Z4 Clevis Rear Shock Top Mounts | 90366","description":"\u003ch2\u003eMillway BMW E30 E36 E46 Z3 Z4 Clevis Rear Shock Top Mounts | 90366\u003c\/h2\u003e\u003cp\u003eGenuine Millway Motorsport component from Sweden for \u003cstrong\u003eBMW E30\/E36\/E46 3 Series including M3, E36-platform Z3 and E85\/E86 Z4 incl M versions using rod-end rear dampers\u003c\/strong\u003e. Millway manufacturer reference \u003cstrong\u003e90366\u003c\/strong\u003e; Nineteen72 catalogue SKU MW90366.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium upper rear damper clevis brackets, finished black anodised\u003c\/li\u003e\n\u003cli\u003eDedicated to rod-end style rear damper top connections\u003c\/li\u003e\n\u003cli\u003ePair supplied for the left and right rear upper shock towers\u003c\/li\u003e\n\u003cli\u003eAppropriate for compatible motorsport coilover and custom rear damper applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBMW fitment\u003c\/h3\u003e\u003cp\u003eBMW E30\/E36\/E46 3 Series including M3, E36-platform Z3 and E85\/E86 Z4 incl M versions using rod-end rear dampers. Exact chassis, suspension or seat configuration matters; check the manufacturer part number before purchasing.\u003c\/p\u003e\u003ch3\u003eInstallation and availability\u003c\/h3\u003e\u003cp\u003eDo not order for a normal threaded shock absorber stud; select Millway 90020 for a compatible Uniball top mount instead. Verify the rod-end eye width, clevis pin size and tower mounting before fitting.\u003c\/p\u003e\u003cp\u003eSold at the stated price including UK VAT. Stock and dispatch lead times depend on the UK supplier. Contact Nineteen72 for confirmation on special-order parts.\u003c\/p\u003e\u003cp\u003eBrowse our \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport catalogue\u003c\/a\u003e and \u003ca href=\"\/collections\/track-day-motorsport-parts\"\u003etrack-day parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618613592454,"sku":"MW90366","price":144.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/mw90366-millway-photo.jpg?v=1791896014"},{"product_id":"millway-bmw-e46-m3-porsche-boxster-s-rear-caliper-adapter-brackets-90409","title":"Millway BMW E46 M3 Porsche Boxster S Rear Caliper Adapter Brackets | 90409","description":"\u003ch2\u003eMillway Motorsport 90409 Rear Caliper Adapter Brackets for BMW E46 M3\u003c\/h2\u003e\u003cp\u003eFit compatible \u003cstrong\u003ePorsche 996 \/ 986 Boxster S rear brake calipers\u003c\/strong\u003e to the BMW E46 M3 rear axle using Millway Motorsport's dedicated lightweight machined-steel adapter brackets. Manufacturer reference \u003cstrong\u003e90409 (MW90409)\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3\u003eTechnical information\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDedicated bracket set for BMW E46 M3 rear axle\u003c\/li\u003e\n\u003cli\u003eDesigned for compatible Porsche 986\/996 Boxster S rear caliper shapes, subject to brake-system verification\u003c\/li\u003e\n\u003cli\u003eManufactured from machined steel with lightening features\u003c\/li\u003e\n\u003cli\u003eIncludes property class 12.9 mounting hardware, supplied per rear axle set\u003c\/li\u003e\n\u003cli\u003eDesigned around the standard E46 M3 rear brake disc arrangement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrake calipers, brake pads, brake hoses and discs are not included\u003c\/strong\u003e unless explicitly specified. Confirm exact Porsche caliper casting, disc dimensions, handbrake clearance, correct hydraulic hose routing, wheel clearance and all required hardware before purchasing. Not approved as a universal 986\/996 brake conversion or for other BMW chassis.\u003c\/p\u003e\u003ch3\u003eProfessional installation\u003c\/h3\u003e\u003cp\u003eRear brake conversions are safety-critical, require specialist installation and may require road-use compliance approval. The finished brakes must be leak-tested and inspected before use.\u003c\/p\u003e\u003cp\u003ePrice includes UK VAT. Supplier stocks vary; UK special-order lead time may be approximately 2–3 weeks, subject to confirmation.\u003c\/p\u003e\u003cp\u003eExplore \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport parts\u003c\/a\u003e and \u003ca href=\"\/collections\/bmw-m3-e92-e93-suspension\"\u003eBMW M chassis performance suspension\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618620342662,"sku":"MW90409","price":205.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/millway-90409-e46-m3-porsche-rear-caliper-brackets.jpg?v=1791896644"},{"product_id":"millway-bmw-e36-e46-z4-clubsport-rear-trailing-arm-bushings-90581","title":"Millway BMW E36 E46 Z4 Clubsport Rear Trailing Arm Bushings | 90581","description":"\u003ch2\u003eMillway Motorsport 90581 Clubsport Rear Trailing Arm Bushings\u003c\/h2\u003e\u003cp\u003eUpgrade rear trailing arm mount precision on BMW E36\/E46 3 Series (including M3) and BMW E85\/E86 Z4\/Z4M with Millway Motorsport \u003cstrong\u003e90581\u003c\/strong\u003e sealed-bearing Clubsport bushings.\u003c\/p\u003e\u003ch3\u003eDesign and kit contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePair of complete sealed-bearing rear trailing-arm mounting bushes\u003c\/li\u003e\n\u003cli\u003eBillet machined aluminium housings with sealed ball joints and stainless sleeves\u003c\/li\u003e\n\u003cli\u003eReduced geometry change and compliance under rear suspension load\u003c\/li\u003e\n\u003cli\u003eThreaded retaining rings and required matching sleeves are included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStreet\/Clubsport versus race Uniball\u003c\/h3\u003e\u003cp\u003eThe 90581 is the \u003cstrong\u003eClubsport \/ sealed-bearing\u003c\/strong\u003e version, distinct from the \u003ca href=\"\/products\/millway-bmw-e36-e46-z4-rear-trailing-arm-uniball-bushes-90088\"\u003eMillway 90088 open Uniball race-oriented rear trailing arm kit\u003c\/a\u003e. Choose based on how often the vehicle is used on the road, exposure to contaminants, required service intervals and intended track geometry.\u003c\/p\u003e\u003ch3\u003eBMW compatibility and installation\u003c\/h3\u003e\u003cp\u003eBMW E36 3 Series\/M3, E46 3 Series\/M3 and E85\/E86 Z4 including Z4 M. Verify exact trailing arm and hardware configuration. Following pressing out original bushes, installation should be completed by a specialist and followed by rear axle alignment.\u003c\/p\u003e\u003cp\u003ePrice includes UK VAT; availability and supplier lead times must be confirmed.\u003c\/p\u003e\u003cp\u003eBrowse all \u003ca href=\"\/collections\/millway-suspension-bushes\"\u003eMillway suspension bushes\u003c\/a\u003e or the full \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618640265606,"sku":"MW90581","price":282.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/mw90581-millway-bmw-bushes.jpg?v=1791897681"},{"product_id":"millway-bmw-e46-m3-60mm-front-control-arm-bushes-90307","title":"Millway Motorsport BMW E46 M3 60mm Front Control Arm Bushings | 90307","description":"\u003ch2\u003eMillway Motorsport BMW E46 M3 60mm Front Control Arm Bushings | 90307\u003c\/h2\u003e\u003cp\u003eGenuine \u003cstrong\u003eMillway Motorsport 90307\u003c\/strong\u003e, manufactured in Sweden for \u003cstrong\u003eBMW E46 M3 with the 60mm factory front control-arm rear bushing carrier\u003c\/strong\u003e. Designed for track-focused suspension and chassis preparation, with UK pricing including VAT.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrecision low-compliance Delrin, aluminium and polyurethane bushing conversion\u003c\/li\u003e\n\u003cli\u003eUses compatible factory 60mm housings\u003c\/li\u003e\n\u003cli\u003eSupplied as two bushings, enough for both front control arms\u003c\/li\u003e\n\u003cli\u003eDesigned to limit control-arm compliance in hard braking and high-load cornering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eBMW E46 M3 with the 60mm factory front control-arm rear bushing carrier. Double-check the vehicle, axle and hardware against the manufacturer reference, particularly if other aftermarket parts are fitted.\u003c\/p\u003e\u003ch3\u003eFitting and important exclusions\u003c\/h3\u003e\u003cp\u003eNot the 66mm E46 non-M \/ Z4 kit (Millway 90308), and holders\/control arms are not supplied. Check the carrier bore before ordering.\u003c\/p\u003e\u003cp\u003ePart number: \u003cstrong\u003e90307\u003c\/strong\u003e. Product SKU: \u003cstrong\u003eMW90307\u003c\/strong\u003e. Hack Engineering source pricing used as UK RRP. Lead time and stock subject to supplier confirmation.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport\u003c\/a\u003e, \u003ca href=\"\/collections\/millway-suspension-bushes\"\u003eMillway Bushes \u0026amp; Uniball\u003c\/a\u003e and \u003ca href=\"\/collections\/track-day-motorsport-parts\"\u003eTrack Day Parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618640396678,"sku":"MW90307","price":237.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/millway-mw90307.jpg?v=1791897576"},{"product_id":"millway-bmw-e46-m3-billet-offset-front-control-arm-bush-mounts-90520","title":"Millway Motorsport BMW E46 M3 Billet Offset Front Control Arm Bush Brackets | 90520","description":"\u003ch2\u003eMillway Motorsport BMW E46 M3 Billet Offset Front Control Arm Bush Brackets | 90520\u003c\/h2\u003e\u003cp\u003eGenuine \u003cstrong\u003eMillway Motorsport 90520\u003c\/strong\u003e, manufactured in Sweden for \u003cstrong\u003eBMW E46 M3 factory front control arm rear mounting locations\u003c\/strong\u003e. Designed for track-focused suspension and chassis preparation, with UK pricing including VAT.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBillet-aluminium left\/right front-control-arm rear bushing brackets\u003c\/li\u003e\n\u003cli\u003eOffset bushing centres for a caster-focused front geometry change\u003c\/li\u003e\n\u003cli\u003eDelrin and polyurethane bearing surfaces\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair with offset brackets and bushes; control arms are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eBMW E46 M3 factory front control arm rear mounting locations. Double-check the vehicle, axle and hardware against the manufacturer reference, particularly if other aftermarket parts are fitted.\u003c\/p\u003e\u003ch3\u003eFitting and important exclusions\u003c\/h3\u003e\u003cp\u003eThese full replacement billet brackets are different from Millway's press-in 90307 bushes. Verify clearances and alignment with any tubular exhaust headers, track arms or other front suspension changes.\u003c\/p\u003e\u003cp\u003ePart number: \u003cstrong\u003e90520\u003c\/strong\u003e. Product SKU: \u003cstrong\u003eMW90520\u003c\/strong\u003e. Hack Engineering source pricing used as UK RRP. Lead time and stock subject to supplier confirmation.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport\u003c\/a\u003e, \u003ca href=\"\/collections\/millway-suspension-bushes\"\u003eMillway Bushes \u0026amp; Uniball\u003c\/a\u003e and \u003ca href=\"\/collections\/track-day-motorsport-parts\"\u003eTrack Day Parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618640429446,"sku":"MW90520","price":370.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/millway-mw90520.jpg?v=1791897583"},{"product_id":"millway-bmw-e46-m3-z4-rear-subframe-solid-bushings-90406","title":"Millway Motorsport BMW E46 M3 Z4 Rear Solid Aluminium Subframe Bushes | 90406","description":"\u003ch2\u003eMillway Motorsport BMW E46 M3 Z4 Rear Solid Aluminium Subframe Bushes | 90406\u003c\/h2\u003e\u003cp\u003eGenuine Swedish-engineered Millway Motorsport component, part number \u003cstrong\u003e90406\u003c\/strong\u003e, for \u003cstrong\u003eBMW E46 3 Series including E46 M3; selected E85\/E86 Z4 and Z4 M rear subframe carrier applications\u003c\/strong\u003e. UK VAT included.\u003c\/p\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSolid aluminium rear subframe-to-body mounting bushes\u003c\/li\u003e\n\u003cli\u003eFull vehicle set of four, including front and rear carrier positions\u003c\/li\u003e\n\u003cli\u003eReplaces ageing rubber to limit rear suspension carrier movement\u003c\/li\u003e\n\u003cli\u003ePrecision machined components with manufacturer positional markings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication and exclusions\u003c\/h3\u003e\u003cp\u003eBMW E46 3 Series including E46 M3; selected E85\/E86 Z4 and Z4 M rear subframe carrier applications. Always check the product against your exact chassis, axle and suspension system.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003eDo not confuse solid subframe bushes with rear differential mountings 90356. Subframe installation requires careful inspection of E46 floor\/rear-axle carrier mounting points and professional geometry alignment.\u003c\/p\u003e\u003cp\u003eStock and lead time require confirmation from Hack Engineering. When available to backorder, allow time for UK distributor replenishment.\u003c\/p\u003e\u003cp\u003eSee \u003ca href=\"\/collections\/millway-motorsport\"\u003eall Millway Motorsport parts\u003c\/a\u003e, \u003ca href=\"\/collections\/millway-suspension-bushes\"\u003eMillway suspension bushes\u003c\/a\u003e and our \u003ca href=\"\/collections\/track-day-motorsport-parts\"\u003etrack day parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618646557062,"sku":"MW90406","price":267.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/mw90406-millway-genuine.jpg?v=1791897999"},{"product_id":"millway-bmw-e46-m3-z4-m-solid-aluminium-differential-bushes-90356","title":"Millway Motorsport BMW E46 M3 E85 E86 Z4 M Solid Differential Bushes | 90356","description":"\u003ch2\u003eMillway Motorsport BMW E46 M3 E85 E86 Z4 M Solid Differential Bushes | 90356\u003c\/h2\u003e\u003cp\u003eGenuine Swedish-engineered Millway Motorsport component, part number \u003cstrong\u003e90356\u003c\/strong\u003e, for \u003cstrong\u003eBMW E46 M3 and BMW Z4 M E85\/E86 with the S54-associated rear differential mounting arrangement\u003c\/strong\u003e. UK VAT included.\u003c\/p\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete set of three machined solid aluminium rear differential bushings\u003c\/li\u003e\n\u003cli\u003eReduces rubber bushing deformation during hard acceleration and cornering\u003c\/li\u003e\n\u003cli\u003eIntended for E46 M3\/Z4 M differential mount geometry\u003c\/li\u003e\n\u003cli\u003eSuitable for dedicated track or motorsport builds with acceptable NVH levels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication and exclusions\u003c\/h3\u003e\u003cp\u003eBMW E46 M3 and BMW Z4 M E85\/E86 with the S54-associated rear differential mounting arrangement. Always check the product against your exact chassis, axle and suspension system.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003eThese are differential bushings and will not replace the four subframe bushings, available separately as Millway 90406. Substantial additional differential noise\/vibration may be transmitted to the body. Verify the differential carrier type.\u003c\/p\u003e\u003cp\u003eStock and lead time require confirmation from Hack Engineering. When available to backorder, allow time for UK distributor replenishment.\u003c\/p\u003e\u003cp\u003eSee \u003ca href=\"\/collections\/millway-motorsport\"\u003eall Millway Motorsport parts\u003c\/a\u003e, \u003ca href=\"\/collections\/millway-suspension-bushes\"\u003eMillway suspension bushes\u003c\/a\u003e and our \u003ca href=\"\/collections\/track-day-motorsport-parts\"\u003etrack day parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618646589830,"sku":"MW90356","price":148.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/mw90356-millway-genuine.jpg?v=1791898005"},{"product_id":"millway-bmw-e46-m3-steering-rack-travel-limiters-90154-2","title":"Millway Motorsport BMW E46 M3 Steering Rack Travel Limiters | 90154-2","description":"\u003ch2\u003eMillway Motorsport BMW E46 M3 Steering Rack Travel Limiters | 90154-2\u003c\/h2\u003e\u003cp\u003eGenuine Swedish-made \u003cstrong\u003eMillway Motorsport 90154-2\u003c\/strong\u003e performance component for \u003cstrong\u003eBMW E46 3 Series and E46 M3 with compatible standard steering rack and tie rod assemblies\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePair of precision-steering-rack movement limiters\u003c\/li\u003e\n\u003cli\u003eLimits lock-to-lock steering travel when oversize wheels, tyres or brake ducts contact bodywork\u003c\/li\u003e\n\u003cli\u003eCan help prevent excessive inner wheel arch rubbing at full lock\u003c\/li\u003e\n\u003cli\u003eSmall black machined stops; sold as one pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and exclusions\u003c\/h3\u003e\u003cp\u003eBMW E46 3 Series and E46 M3 with compatible standard steering rack and tie rod assemblies. Confirm the exact chassis, control-arm or rear-carrier design and aftermarket hardware prior to ordering.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003eThese E46-specific limiters are distinct from the E30\/E36 rack conversion limiters (Millway 90154). Professional steering safety check after fitting is essential because they reduce maximum steering lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold for £33.52 including UK VAT\u003c\/strong\u003e. UK distributor stock varies; supply and dispatch timing will be confirmed for backorders. Millway part no. 90154-2; catalogue SKU MW90154-2.\u003c\/p\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport range\u003c\/a\u003e, \u003ca href=\"\/collections\/millway-suspension-bushes\"\u003eMillway bushes\u003c\/a\u003e and our \u003ca href=\"\/collections\/track-day-motorsport-parts\"\u003etrack-day parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618664186246,"sku":"MW90154-2","price":33.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/mw90154-2-millway-oem-product.jpg?v=1791898576"},{"product_id":"millway-bmw-e36-e46-m3-adjustable-rear-anti-roll-bar-drop-link-90196-9","title":"Millway Motorsport BMW E36 E46 M3 Adjustable Rear Anti-Roll Bar Link | 90196-9","description":"\u003ch2\u003eMillway Motorsport BMW E36 E46 M3 Adjustable Rear Anti-Roll Bar Link | 90196-9\u003c\/h2\u003e\u003cp\u003eGenuine Swedish-made \u003cstrong\u003eMillway Motorsport 90196-9\u003c\/strong\u003e performance component for \u003cstrong\u003eBMW E36 and E46 3 Series including M3 with aftermarket adjustable rear anti-roll bars that use bolt-through link mountings, such as selected Eibach and H\u0026amp;R bars\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3\u003eKey details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless-steel adjustable-length rear anti-roll bar droplink\u003c\/li\u003e\n\u003cli\u003eRod ends and central adjuster with locking nuts\u003c\/li\u003e\n\u003cli\u003eEnables suspension corner-weighting without anti-roll bar preload when installed and adjusted correctly\u003c\/li\u003e\n\u003cli\u003ePriced per single link; purchase two if fitting both sides\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and exclusions\u003c\/h3\u003e\u003cp\u003eBMW E36 and E46 3 Series including M3 with aftermarket adjustable rear anti-roll bars that use bolt-through link mountings, such as selected Eibach and H\u0026amp;R bars. Confirm the exact chassis, control-arm or rear-carrier design and aftermarket hardware prior to ordering.\u003c\/p\u003e\u003ch3\u003eFitting notes\u003c\/h3\u003e\u003cp\u003eDOES NOT FIT the original rear anti-roll bars where the drop link attachment does not use an aftermarket bolt-through arrangement. Verify adjustable bar bracket style and link length before ordering. Sold singly, not as a pair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold for £172.37 including UK VAT\u003c\/strong\u003e. UK distributor stock varies; supply and dispatch timing will be confirmed for backorders. Millway part no. 90196-9; catalogue SKU MW90196-9.\u003c\/p\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/millway-motorsport\"\u003eMillway Motorsport range\u003c\/a\u003e, \u003ca href=\"\/collections\/millway-suspension-bushes\"\u003eMillway bushes\u003c\/a\u003e and our \u003ca href=\"\/collections\/track-day-motorsport-parts\"\u003etrack-day parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Millway Motorsport","offers":[{"title":"Default Title","offer_id":67618664644998,"sku":"MW90196-9","price":172.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/files\/mw90196-9-millway-oem-product.png?v=1791898600"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/0411\/2989\/collections\/90352-camber-m3e46-millway_70203fc5-00ed-4698-8e2e-dc4390002978.jpg?v=1792702315","url":"https:\/\/www.nineteen72performance.co.uk\/collections\/millway-bmw-e46-m3-suspension-camber-plates.oembed","provider":"Nineteen72 Performance","version":"1.0","type":"link"}