



BIMECC Porsche 718 Boxster & Cayman 982 Wheel Spacer Kit | 5x130
Tax excluded. Shipping calculated at checkout
Description
Fitment verification required before ordering: This product is visible on our website but the selected Bimecc spacer must be confirmed against the Porsche hub design, particularly the five-tab locating system. Contact us with your VIN, model year and a hub photograph so we can confirm the correct parts before making the kit available to purchase.
Bimecc Porsche 718 Boxster and Cayman (982) Wheel Spacers
Bimecc spacer options for Porsche 718 Boxster and Cayman 982-generation cars with conventional five-bolt wheels, including standard, S and GTS variants subject to their wheel and hub specifications. Special models such as 718 Cayman GT4 and Boxster Spyder require an individual clearance and hub check before any kit can be recommended.
Vehicle compatibility by Porsche generation
| Chassis | Typical five-bolt applications | Model years (guide) |
|---|---|---|
| 718 Boxster (982) | Boxster, S, GTS with standard five-bolt wheel fixings | Approx. 2016 onwards |
| 718 Cayman (982) | Cayman, S, GTS with standard five-bolt wheel fixings | Approx. 2016 onwards |
| 718 GT4 / Spyder | Potential five-bolt applications only after vehicle-specific consultation; not a confirmed fitment | Depends on exact version |
Check your actual car: Porsche model years, wheel types and factory hub designs vary. The above is a search-and-fitment guide, not a guarantee that every listed trim or wheel will fit.
Choose front and rear spacer thickness
15mm or 20mm per axle, plus None on an unspaced axle (measure both arches). Your configuration is selected separately for front and rear, together with optional locking wheel bolts.
- One axle: two spacers and the appropriate extended wheel-fixing hardware, subject to kit configuration.
- Both axles: four spacers and hardware for the front and rear.
- Locking bolts: select Yes where required; the supplied locking hardware and matching seat/length need confirming for the selected wheels.
Typical spacer configurations: Specialists often suggest about 10mm front / 12mm rear for a subtle standard 718 setup, or around 15mm/15mm for a more pronounced stance. Only 15mm and 20mm are currently selectable here. These sizes are not suitable for every wheel/tyre setup; models such as GT4 may need a much smaller front spacer or none at all.
Porsche wheel fitment specification
- PCD: 5x130 (five-bolt wheels only)
- Centre bore: nominal 71.6mm, with the correct locating lip/tab profile for your vehicle
- Factory wheel bolt thread: typically M14 x 1.5
- Factory wheel bolt seat: typically R14 spherical / ball seat; some aftermarket wheels use other seats
Spacer thickness is measured per wheel. A 15mm spacer increases track width by approximately 30mm across that axle and effectively reduces wheel ET by 15mm. Confirm arch, wheel, tyre, brake and hub clearance throughout steering and suspension travel.
Before ordering and fitting
IMPORTANT HUB CHANGE: Porsche 718 vehicles built from approximately 9 December 2019 may use a five-tab hub, while earlier cars can use a three-tab design. The registration year alone is not reliable: inspect the hub or confirm the hub part number by VIN with Porsche. A standard 71.6mm spacer is not automatically correct for both styles. Bimecc-specific compatibility for the chosen size must be verified. Excludes all centre-lock systems, including GT4 RS and Spyder RS when fitted.
Never fit standard-length bolts through thicker spacers. Check the actual original bolt's seat, thread and shank length, and obtain suitable longer bolts for the chosen thickness. Confirm correct thread engagement, tightening torque and post-installation checks with a competent technician. If your car already uses a wheel-stud conversion, bolt-on hardware in the kit may not be suitable.
How do I choose the right Bimecc spacer kit?
- Measure the clearance from wheel/tyre to the outer arch at the front and rear with the car at normal ride height.
- Allow for steering lock, tyre sidewall, suspension compression, lowered springs and aftermarket wheel offset.
- Confirm the correct 5x130 PCD, 71.6mm bore, hub-centre shape and bolt seat before placing an order.
- Choose the smaller safe spacer size when the measured clearance is borderline, and obtain fitting advice if unsure.
Product imagery: representative Bimecc spacer photos from our existing range; the photo may not depict the exact Porsche-specific locating profile or selected spacer width. Availability and exact matching Bimecc hardware must be confirmed before fulfilment.
Ask Nineteen72 Performance for Porsche wheel spacer fitment advice. Please include chassis, model year, wheel size/offset, tyre sizes, hub photo where possible and the front/rear clearance measurements.
Explore Bimecc wheel spacers and hardware, Porsche performance parts, or compare Boxster/Cayman spacer kits and 992/992.2 spacer kits.
More information
Get Booked in for fitting here
Warranty, Shipping and Returns
Products are supplied with the applicable manufacturer warranty. We offer UK and worldwide shipping. Please refer to the live availability information and our shipping and returns policies before ordering. Contact us if you need to confirm compatibility, intended use or any product-specific conditions.
Finance Options
Available payment options and current terms are shown at checkout. Instalment options depend on the provider and eligibility. Please review the terms displayed before confirming your payment.
Why buy from us?
Why buy from us?
Secure payments
Secure payments
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Specifications
- Brand
- Bimecc
- Product type
- Wheel Spacers
- SKU:
- N72-BIM-P718-F00-R15-N
- Front Size
- None
- Rear Size
- 15mm
- Locking Wheel Bolts
- NO

Ready for Dispatch
View Laps earning rules0 Laps
Choose an option in GBP to see an eligible-spend estimate.
How it works
Earn on eligible product spend after discounts. Delivery, gift cards and trade orders are excluded. Purchase Laps become available after 30 days. Laps cannot be redeemed during Black Friday.
This estimate follows your selected option and quantity. Checkout discounts can change eligibility. Bundle prices count once. Appstle records the final award after payment.
Laps redemption is paused during Black Friday.
Need help?
Product questions answered
Helpful answers before you order. Need more detail? Our team can help.
Which spacer or fixing size do I need?
Check bolt pattern, centre bore, fixing thread, seat type and required length against your wheels and vehicle. Tell us whether you use original or aftermarket wheels and any existing spacers or studs.
How do I check clearance before ordering?
Measure your current wheel-to-body clearance and check the proposed setup throughout suspension and steering movement. Use the product instructions for installation requirements and ask your installer to confirm the correct fixings.
When will my order arrive?
Select your required option and check the live availability message above. Dispatch is when your order leaves us; delivery takes additional time and depends on the service and destination. If no verified lead time is shown, or you need the item for a fitting appointment or event, contact Nineteen72 Performance before ordering.
What is included in the price?
Check the product description, selected option and stated quantity before ordering. Images may show optional equipment or an example installation. If you need a matching pair, a complete kit or additional hardware, ask us to confirm exactly what is included.
How do I get help before ordering?
Contact Nineteen72 Performance with a link to this product and your question. For vehicle-specific parts, include your model, year, engine and any modifications that may affect compatibility.
No FAQs found. Try a different search.



