For a road car where the aim is to set the ride height and leave the damping alone, start with a standard ap Sportfahrwerke kit, ST X or KW V1 in the correct application. If you want to alter how quickly the car settles after a crest, ST XA and KW V2 add rebound adjustment. KW V3 gives a second, independent control for compression. If the job also calls for front camber adjustment, check the supplied top mounts before choosing.
Which adjustments are you buying?
| Range | What the driver can change | When it earns its place |
|---|---|---|
| ap Sportfahrwerke standard coilovers | Ride height, with damping set for the kit. Check the specification of the particular ap model. | You want a matched spring and damper package and prefer to leave the damping to the manufacturer. |
| ST X or KW V1 | Ride height with factory-set damping. | You can compare vehicle approvals, housing material and clearance without paying for manual damper settings. |
| ST XA or KW V2 | Ride height and rebound. Rebound controls how the suspension extends after compression. | You want some control over how the car settles and a straightforward starting point for road use. |
| ST XTA | Rebound and the top-mount adjustment specified for the application. | You want to discuss front alignment with your fitter and need to know which hardware comes in the box. |
| KW V3 | Independent rebound and low-speed compression. | You want to tune body movement on the brakes separately from how the damper recovers. |
| ST XTA plus 3 | Rebound, low-speed compression and high-speed compression, with application-specific top mounts. | You have a repeatable setup, access to geometry adjustment and circuit time to compare changes. |
Low-speed and high-speed compression describe how fast the damper shaft moves. A sharp ridge at modest road speed can move the shaft quickly. The extra dial matters when you know which response you want to change.
Four cars where the choice changes
Volkswagen Golf Mk7 owner comparing ap coilovers
A Golf Mk7 badge alone leaves several fitment questions open. Check hatchback or estate, driven wheels, front strut diameter, rear axle design and permitted axle loads. For example, 50 mm front struts with a rear beam and 55 mm struts with independent rear suspension appear as different ap applications. A registration or VIN and the axle figures on the vehicle plate give us a better starting point than engine size alone. Check the ap Sportfahrwerke catalogue or shop ap Sportfahrwerke coilovers by part number.
BMW 1 Series hatchback with ap 11520039 on the shortlist
For an older 1 Series hatchback, ap lists 11520039 for specified E81 and E87 applications. Its certificate uses type markings such as 187, 1K2 and 1K4. The later F20 M135i and M140i belong to a different chassis family. Record the model year and permitted axle loads before requesting a kit or comparing it with ST. The ap GF20-039 vehicle certificate identifies the covered vehicle types. For an F20, check the ST Suspension BMW applications.
Porsche 987 Boxster or Cayman on road tyres
For the 987 applications listed, ST X 13271016 is the fixed-damping choice and ST XA 18271016 adds rebound adjustment. Choose XA if you expect to use that adjustment. Tell us whether the car has PASM before ordering. A warning cancellation module and a damper that retains electronic control perform different jobs.
BMW F87 M2 or M2 Competition for fast road and track
The KW V3 352200BH has independent rebound and compression adjustment. The ST XTA plus 3 18202208BH includes front top mounts and splits compression into low- and high-speed controls. If you will pay a workshop to fit and align the car, compare the complete fitted specification, including any mounts and geometry work you require.
Buying coilovers for a UK daily driver
Think about your steepest driveway, usual passenger load and wheel and tyre clearance before choosing a ride height. For winter use, compare the actual damper housings. ST specifies galvanised steel for the F87 kit above and KW specifies stainless steel for its V3 inox struts. Both threaded adjustment areas need care. A coilover setup with usable bump travel is a better starting point than choosing the lowest published number.
For the next step, browse ST coilovers for BMW and Porsche or KW suspension by chassis. The ST range guide and KW V1, V2, V3, Clubsport and H.A.S. guide explain each family in more detail. For a fitted quote, include the model, year, drivetrain, factory dampers, wheel and tyre setup, and how often the car goes on track when you enquire about suspension fitting and geometry.
For the full Golf example, see which ap coilovers fit a Mk7 Golf. BMW owners can use the F87 M2 part-number comparison for KW, ST and Nitron.
See ap 11520039 for the BMW 1 Series for the listed E81, E82 and E87 applications.





